Miniature & Low Power Consumption Type Flammable Gas Sensor - NAP-55A
NAP-55A is a miniature & low power consumption type sensor. NAP-55A is mainly used for gas detectors and leak testers.
Flammable Gas Sensors for Industrial Applications - NAP-100AC
NAP-100 series are flammable gas sensors for industrial applications, and 4 types are provided for users’ choice.
Flammable Gas Sensors for Industrial Applications - NAP-100AM
NAP-100 series are flammable gas sensors for industrial applications, and 4 types are provided for users’ choice
Formaldehyde (CH2O) Gas Sensor - SS21F8
SS21F8 Formaldehyde (CH2O) Gas Sensor. Indoor air monitoring applications. Measurement Range, 0-1,000 ppm.
Screwfit Zirconia Oxygen Sensor - O2S-FR-T2-18C
O2S-FR-T2-18C Screwfit Zirconia Oxygen Sensor. Probe mounting positions available: 28mm, Oxygen pressure range 2 mbar - 3bar max.
Hydrogen Sensor H2 Sensor - SenseH2
Designed for hydrogen monitoring, this ceramic sensor exhibits a highly sensitive, selective, and rapid response to the presence of hydrogen in ambient air.
4-20 mA Digital Transmitter Board Alphasense Type A and B Toxic Gas Sensors - Digital Transmitter Board
4 to 20 mA Digital Transmitter Board Alphasense Type A and B Toxic Gas Sensors.
P-type Metal Oxide Carbon Monoxide (CO) Sensor - CO-MFF, CO-PFF, CO-AFF
CO-MFF, CO-PFF, CO-AFF P-type Metal Oxide CO Sensor, equipped with a PTFE-based dust/water filter and an Activated Carbon filter.
Flange Mounted Zirconia Oxygen Sensor - O2S-FR-T5
O2S-FR-T5 Flange Mounted Zirconia Oxygen Sensor. Oxygen pressure range 2 mbar - 3bar. High accuracy, Linear output signal.
Long Probe Zirconia Oxygen Sensors - O2S-T6 / O2S-T6-SH
O2S-T6-SH / O2S-T6 Long Probe Zirconia Oxygen Sensors. Oxygen pressure range: 2mbar - 3bar. Long life, non-depleting technolog. High accuracy.
Zirconia Oxygen Sensor Interface Board - O2I-Flex
O2I-Flex Oxygen Sensor Interface Board, High accuracy linear output. Can be calibrated in fresh air (20.7% O2 ) or in any other known O2 concentration.
Flange Mount Zirconia Oxygen Sensor - O2S-FR-T4-4P
O2S-FR-T4-4P Flange Mount Zirconia Oxygen Sensor, 4-pin. Oxygen pressure range 2 - 3bar. Long life. Can be used in high pressure and temperature environments.
Zirconia Oxygen Sensor System - O2S-FR-T2-18BM-C-RS485
O2S-FR-T2-18BM-C-RS485 Zirconia Oxygen Sensor System. RS485 Digital output. Oxygen range (Modbus RTU)?: 0.1-100% O2?
Oxygen Sensor Interface Board - OXY-LC
OXY-LC Oxygen Sensor Interface Board, control SST’s range of dynamic oxygen (O2) sensors.Three interface variants available: RS485, 0-10VDC and 4-20mA outputs.
Miniature Zirconia Oxygen Sensors - O2S-T3 / O2S-FR-T3
O2S-T3 / O2S-FR-T3 Miniature Zirconia Oxygen Sensors. Oxygen pressure range: 2mbar - 3bar. Long life, Can be used in high pressure and temperature environments.
Screwfit Zirconia Oxygen Sensor - O2S-FR-T2-18B
O2S-FR-T2-18B Screwfit Zirconia Oxygen Sensor, Probe mounting positions available: 45mm, Oxygen pressure range: 2mbar - 3bar max.
Screwfit Zirconia Oxygen Sensor - O2S-FR-T2-18A
O2S-FR-T2-18A Screwfit Zirconia Oxygen Sensor. Probe mounting positions available: 55mm, Oxygen pressure range: 2mbar - 3bar max.
Flange Mount Zirconia Oxygen Sensor - O2S-FR-T4-5P
O2S-FR-T4-5P Flange Mount Zirconia Oxygen Sensor, 5-pin. Oxygen pressure range 2 - 3bar. Long life. Can be used in high pressure and temperature environments.
Oxygen Analyser - OXY-Flex-x Series
OXY- Flex Oxygen Analyser. High accuracy linear output. suitable for measuring oxygen in areas that are not easily accessible, or in closed systems.
Zirconia Oxygen Analyser - OXY-COMM-RS485
OXY-COMM-RS485 Zirconia Oxygen Analyser is designed for controlled atmosphere applications such as refrigerated transportation containers and fire prevention.
CO Sensor CH4 Sensor - MQ-D9
MQ-D9 is a semiconductor sensor for co and CH4 which is mainly used as sensor element for detect natural gas, methane, liquefied gas, butane, propane.
Catalytic Combustible Gas Sensor - MQ-ZC
MQ-ZC catalytic combustible gas sensor operate on the catalytic combustion principle.
Natural Gas Sensor Methane Sensor CH4 Sensor - MQ-D4
Natural Gas Sensor Methane Sensor CH4 Sensor MQ-D4 is mainly used in leak detection, monitoring, alarm device and intelligent gas leak alarm system.
Combustible Gas Sensor - MQ-D5
MQ-D5 is a semiconductor combustible gas sensor which is mainly used for leak detection, monitoring, alarm and intelligent gas leak alarm system
Liquefied Gas Sensor LPG Sensor - MQ-D6
MQ-D6 LPG Sensor is a semiconductor liquefied gas sensor which is mainly used for leak detection, monitoring, alarm device and intelligent gas leak alarm
Low Price High Quality Carbon Monoxide CO Sensor - MQ-D7
MQ-D7 is a semiconductor carbon monoxide gas sensor which is mainly used as sensor element for detect carbon monoxide gas on leak detection.
Low Price High Quality Hydrogen Sensor H2 Gas Sensor - MQ-D8
MQ-D8 is a semiconductor hydrogen gas sensor which is mainly used as sensor element for detect hydrogen gas and manufactured gas on leak detection
Alcohol Sensor - MQ-D3
MQ-D3 is an alcohol sensor which is mainly used for alcohol on leak detection, monitoring, alarm and intelligent gas leak alarm system.
Semiconductor Carbon Monoxide Sensor CO Sensor - MQ-K9
MQ-K9 is a semiconductor CO sensor. It can used to replace Winsense MQ-9.
Anti-interference Methane Sensor CH4 Sensor - MQ-K10
MQ-K10 is high quality CH4 sensor. MQ-K10 gas sensor also good at anti-interference.
Methane Sensor CH4 Sensor for Air Pollution Detection - MQ-D2
MQ-D2 is a methan CH4 sensor which is used in air pollution detection.
Low Power Consumption Combustible Gas Sensor - MQ-D1
MQ-D1 semiconductor combustible gas sensor is mainly used in natural gas, coal gas, LP gas, and smoke etc leak detection.
Hydrogen Sensor H2 Gas Sensor - MQ-K8
MQ-K8 is a semiconductor hydrogen H2 sensor with range 100-1000ppm.
Combustible Gas Sensor Smoke Sensor - MQ-K2
Semiconductor combustible gas sensor MQ-K2 gas-sensitive material used in the clean air low conductivity tin dioxide(SnO2).
Semiconductor Alcohol Sensor - MQ-K3
Semiconductor Alcohol Sensor MQ-K3
MQ-K3 is a semiconductor sensor for Alcohol detection. It has very goodsensitivity and fast response to alcohol.
Methane CH4 Sensor Semiconductor Gas Sensor for Natural Gas - MQ-K4
Methane CH4 Sensor Semiconductor Gas Sensor for Natural Gas
Combustible Gas Sensor - MQ-K5
Combustible Gas Sensor MQ-K5
MQ-K5 gas sensors used in gas sensing material is tin oxide (SnO2), low conductivity in clean air.
LPG Sensor Combustible Gases Sensor - MQ-K6
LPG Sensor Combustible Gases Sensor MQ-K6
MQ-K6 sensitive material used is a gas sensor in a clean air, the lower the conductivity of tin dioxide (SnO2).
Semiconductor CO Sensor - MQ-K7
Semiconductor CO Sensor MQ-K7
Sensitive material of MQ-K7 gas sensor is SnO2, which with lower conductivity in clean air.
LPG Gas Sensor for Coal Mine Use - MC112
MC112 is a catalytic gas sensor which is used for gas concentration detection in industrial field such as natural gas, LPG, coal gas, alkane.
Methane Gas Sensor for LPG, LNG, Coal Gas - MC113
MC113 is a catalytic combustion which is used for detecting combustible gas as LPG, LNG, coal gas.
Catalytic Gas Sensor for LPG, Combustible Gas, Gasoline, Alcohol - MC119
MC119 is a catalytic gas sensor which can be used to combustible gas leaking alarm or detectors and gas concentration detection in industrial field
Electrochemical O2 Oxygen Sensor - ME2-O2
ME2-O2 low consumption, mini size, high sensitivity, wide range of linearity, and better anti-jamming capacity, good reproducibility,stability and reliability
Electrochemical Oxygen Sensor 0~25% vol - ME3-O2
ME3-O2 ,low consumption, high sensitivity, wide range of linearity, and better anti-jamming capacity, good reproducibility,stability and reliability.
Electrochemical Carbon Monoxide (CO) Sensor 0-1000ppm - ME2B-CO
ME2B-CO Electrochemical CO sensor, 0~1000ppm, low Low consumption, High precision, High sensitivity, Extensive linear range
Intelligent Methane (CH4) Gas Sensor 0~100% VOL - MH-741A
MH-741A NDIR CH4 sensor, 0~100% VOL, Fast response and resume, Temperature compensation and excellent linear output, Excellent stability
Infrared Gas Sensor for Oil Industry Methane Sensor - PrimePell
PrimePell Infrared Methane Sensor uses the non-dispersive infrared method to detect the presence of hydrocarbon gases.
Low Cost HVAC Carbon Dioxide Sensor NDIR CO2 Sensor - MisIR
NDIR CO2 Sensor MisIR is a low power (20mW), high performance CO2 sensor. meet the requirements of the HVAC and Demand Led Ventilation markets
Probe Type NDIR CO2 Sensor - COZIR-Probe
COZIR series is an ultra low power (3.5mW), high performance CO2 sensor, ideally suited for battery operation, portable instruments or solar powered application
pre-calibrated module for Methane - NGM2611-E13
The NGM2611 is a pre-calibrated module for natural gas alarms which is precisely calibrated in Figaro’s humidity and temperature controlled facility.
Combustible Gases sensor - TGS816
Applications:
Domestic gas leak detectors and alarms;
Portable gas detectors
Ammonia Sensor - TGS826
Specifications:
1) Target gases: Ammonia
2) range：30-300 ppm
3) Circuit Voltage：Max. 24V (DC only
4) Heater Voltage：5.0±0.2V DC/AC
TGS826
Methane and Carbon Monoxide Sensor - TGS3870
1) Miniature size and low power consumption
2) Low sensitivity to alcohol vapor
3) Long life and low cost
4)CH and CO sensor
GS Yuasa Dissolved Oxygen Sensor KDS-25B - KDS-25B
a unique galvanic cell type sensor
water quality control.
KDS-25B sensor
water quality controller
Pre-calibrated Module for Carbon Dioxide - CDM4161A
1) Ultra compact size
2) High selectivity to CO2
3) Maintenance free
4) Low power consumption
5) Long life
6) Pre-calibrated
7)CO2 module
Infrared Gas Sensor - MPY20-HC-CH4
NDIR gas sensor detects gas by causing molecular vibration of target gas by incident infrared rays.
Infrared Gas Sensor - MPY20-HC-C3H8
good stability, strong selectivity, no oxygen dependence, wide range of detection, long service life, long maintenance cycle
Infrared Gas Sensor - MPY20-CO2
The gas sensor based on the infrared absorption principle has the following strengths: good stability.
NDIR Gas Sensor - MTP40-F
It supports two calibration methods: self-calibration and manual calibration, and the data accuracy error is extremely small.
NDIR CO2 gas Dual Channel Sensor Module - MTP50-A
NDIR gas sensor uses the principle of NDIR to detect the gas in the air.
Home
|
Welcome to ISweek,