Sensors&Transmitters
(1815 products)
PCB Mounted Digital Output Pressure Sensor - MS4515DO
The MS4515DO is a small, ceramic based, PCB mounted pressure transducer from Measurement Specialties.
Fiber Optic Refractive Index Sensor - FRI
FRI is a fiber optic refractive index sensor, ideal for refractive index measurement of fluids in chemical and food processing industry applications.
Single-channel Fiber Optic Signal Conditioner - FTI-10
FTI-10 conditioner is designed to perform accurate single-channel measurements.
Fiber Optic Linear Position and Displacement Sensor - FOD
FOD is a fiber optic linear position and displacement sensor that provides high accuracy, absolute measurements of position and displacement.
MEMS Mass Flow/Clog Sensors - FS7002-B/FS7002-C
FS7002 series mass flow/clog sensors can be used for open air space flow measurement or applied for clog sensing in an open space configuration.
FS8000 Series MEMS Mass Flow Sensors - FS8001/FS8003
The FS8000 requires a power supply of 8~24 Vdc, and provides an analog output of 0.5~4.5 Vdc corresponding to the flow rate from 0 to full scale.
MEMS Mass Flow Sensor - FS4003
FS4003 has a flow channel diameter of 3 mm. This sensors have a very low pressure loss while it can measure air flow up to 5 SLPM.
Gas Mass Flow Sensor - FS4008
FS4008 can be configured to measure flow up to 50 SLPM. It can be applied for gas flow measurement and/or control equipments.
MEMS Mass Flow Sensors - FS4001
FS4001 series mass flow sensors are manufactured using MEMS flow sensor and package technology.
Fiber Optic Temperature Sensor 0°C to 120°C - FOT-HERO
FOT-HERO is a fiber optic temperature sensor specifically designed for use in Electronic Explosive Device (EED) and HERO-type testing applications.
Gage Pressure Microelectronic Transducers 0~160MPa, -40℃~+80℃ - MIDA-TG-51
TG-51 is a gage pressure sensor for oilfield downhole, 0~160MPa, -40℃~+80℃, high stability, wear resistance, impact resistance and anti-corrosion
High-temperatur Gage Pressure Microelectronic Transducer 0~160MPa, -40℃~+300℃ - MIDA-TG-52
TG-52 is a high temperature oilfield download pressure transducer , low temperature error, ?high accuracy, high stability and cost-effective
Absolute Pressure Microelectronic Transducers 0~10MPa, -40℃~+80℃ - MIDA-TA-51
TA-51 is a absolute pressure sensor for oilfield downhole, 0~160MPa, -40℃~+80℃, high stability, wear resistance, impact resistance and anti-corrosion
Gage Pressure Microelectronic Transducers 0~160MPa, -40℃~+120℃ - MIDA-MG-70
MG-70 is a gage pressure microelectronic Transducers, 0~160MPa, -40℃~+120℃, high accuracy, high stability, wear resistance, impact resistance and anti-corrosion
Gage Pressure Microelectronic Transducers 0~160MPa, -40℃~+120℃ - MIDA-MG-71
MG-71 is a gage pressure microelectronic sensor, 0~160MPa, -40℃~+120℃, high accuracy, high stability, wear resistance, impact resistance and
Absolute Pressure Microelectronic Transducers 0~10MPa, -40℃~+120℃ - MIDA-MA-70
MA-70 is a absolute pressure microelectronic transducers 0~10MPa, -40℃~+120℃, high stability, wear resistance, impact resistance and anti-corrosion
High-temperature Gage Pressure Transmitters 0-160MPa - MIDA-SG-12-12-H
MIDA-SG-12-12-H? is a High-temperature Gage Pressure Transmitters, wide pressure range, high stability, wear resistance, impact resistance and anti-corrosion
200kg to 2500kg Low Profile Compression Load Cell - CK
CK 200 kg to 2500 kg Low Profile Compression Load Cell,
17-4 PH Stainless Steel,
Combined Error ≤ ±0.5%,
Protection Class IP67.
High-temperature Gage Pressure Transmitters 0-40MPa - MIDA-SG-12-081-C
SG-12-081-C is a high-temperature gage pressure transmitters 0-40MPa, high stability, wear resistance, impact resistance and anti-corrosion
High-temperature Gage Pressure Transmitters 0-60MPa - MIDA-SG-12-082-C
SG-12-082-C is a high-temperature gage pressure transmitters 0-60MPa, high stability, wear resistance, impact resistance and anti-corrosion
High-temperature Gage Pressure Transmitters 0-1.6MPa - MIDA-SG-12-06-C
SG-12-06-C is a high-temperature gage pressure transmitters 0-1.6MPa, high stability, wear resistance, impact resistance and anti-corrosion
High-temperature Gage Pressure Transmitters 0-160MPa - MIDA-SG-12-11-H
SG-12-11-H? is a high-temperature pressure transmitter, 0-160MPa, high stability, wear resistance, impact resistance and anti-corrosion
Gage Pressure Transmitters 0~160MPa, -40~80℃ - MIDA-SG-13
SG-13 is a Gage Pressure Transmitters, 0~160MPa, Operating temperature range -40~80℃,
Infrared Thermopile Temperature Sensor - TS318-1B0814
TS318-1B0814 used for contactless temperature measurement in many applications; transfer the heat radiation emitted from the objects into a voltage output.
Honeywell Integrated Relative Humidity Sensor - HIH-4000
The HIH-4000 Series Humidity Sensors are designed specifically for high volume OEM (Original Equipment Manufacturer) users.
Thermopile Infrared Temperature Sensor Module - TSEV01CL55
TSEV01CL55 is a contact-less temperature measuring system for OEM use based on the detection of infrared radiation.
Smart Temperature and Humidity Probe HygroClip2 Sensor probe - HC2-S
The HC2-series are digital humidity-temperature probes based on the AirChip 3000 technology.
Platinum Resistance Temperature Sensor - STT-S
The STT-S style platinum resistance temperature sensors are suitable for the equipment surface and internal temperature measurement.
Fiber Optic Pressure Sensor - FOP-C
FOP-C is a fiber optic pressure sensor designed for general industrial applications in harsh and hazardous environments, where very high pressure conditions.
Fiber Optic Temperature Sensor - FOT-L
The FOT-L-SD and FOT-L-BA are fiber optic temperature sensors perfectly suited for harsh environmental conditions.
High-Temperature Fiber Optic Pressure Sensor - FOP-MH
FOP-MH is a fiber optic pressure sensor designed mainly for applications where extreme temperature conditions can be found such as aerospace and defense.
Fiber Optic Pressure Sensor - FOP-M
FOP-M is a fiber-optic pressure sensor designed mainly for applications where high temperature conditions can be found such as in aerospace and defense.
Fiber Optic Pressure Sensor - FOP-MIV
FOP-MIV has been especially designed and tested to fulfill the highest of medical performance requirements.
Fiber Optic Medical Pressure Sensor - FOP-M260
FOP-M260 Fiber Medical Pressure Sensor is used in several FDA and CE approved devices in a variety of clinical applications.
Fiber Optic Signal Conditioner Universal Multichannel Instrument - UMI
UMI conditioner is designed to perform accurate multi-channel temperature, pressure, strain, refractive index, and displacement measurements.
Infrared Gas Sensor for Oil Industry Methane Sensor - PrimePell
PrimePell Infrared Methane Sensor uses the non-dispersive infrared method to detect the presence of hydrocarbon gases.
Low Cost HVAC Carbon Dioxide Sensor NDIR CO2 Sensor - MisIR
NDIR CO2 Sensor MisIR is a low power (20mW), high performance CO2 sensor. meet the requirements of the HVAC and Demand Led Ventilation markets
Probe Type NDIR CO2 Sensor - COZIR-Probe
COZIR series is an ultra low power (3.5mW), high performance CO2 sensor, ideally suited for battery operation, portable instruments or solar powered application
Digital Temperature and Humidity Sensor with PCBA - HTU21D PCBA
HTU21D PCBA sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed.
Capacitive Temperature and Humidity Sensor - HTS2230SMD
HTS2230SMD Based on a unique capacitive cell for humidity measurement and a Negative Temperature Coefficient (NTC) thermistor for temperature measurement.
Voltage Output Temperature and Humidity Sensor - HTG3513CH
humidity sensor HTG3513CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable
Temperature Humidity Sensor Module - HTF3223LF
humidity sensor HTF3223LF is a dedicated humidity and temperature transducer designed for OEM applications where a reliable and accurate measurement is needed
Voltage Output Humidity and Temperature Sensor Module - HTG3835PVBL
HTG3835PVBL is dedicated humidity and temperature plug and play transducer designed for OEM applications where reliable and accurate measurements are needed.
Humidity and Temperature Sensor Module - HTG3535CH
HTG3535CH is a dedicated humidity and temperature plug and play transducer designed for OEM applications where a reliable and accurate measurement is needed.
pre-calibrated module for Methane - NGM2611-E13
The NGM2611 is a pre-calibrated module for natural gas alarms which is precisely calibrated in Figaro’s humidity and temperature controlled facility.
Combustible Gases sensor - TGS816
Applications:
Domestic gas leak detectors and alarms;
Portable gas detectors
Ammonia Sensor - TGS826
Specifications:
1) Target gases: Ammonia
2) range：30-300 ppm
3) Circuit Voltage：Max. 24V (DC only
4) Heater Voltage：5.0±0.2V DC/AC
TGS826
Methane and Carbon Monoxide Sensor - TGS3870
1) Miniature size and low power consumption
2) Low sensitivity to alcohol vapor
3) Long life and low cost
4)CH and CO sensor
GS Yuasa Dissolved Oxygen Sensor KDS-25B - KDS-25B
a unique galvanic cell type sensor
water quality control.
KDS-25B sensor
water quality controller
Pre-calibrated Module for Carbon Dioxide - CDM4161A
1) Ultra compact size
2) High selectivity to CO2
3) Maintenance free
4) Low power consumption
5) Long life
6) Pre-calibrated
7)CO2 module
Infrared Gas Sensor - MPY20-HC-CH4
NDIR gas sensor detects gas by causing molecular vibration of target gas by incident infrared rays.
Infrared Gas Sensor - MPY20-HC-C3H8
good stability, strong selectivity, no oxygen dependence, wide range of detection, long service life, long maintenance cycle
Infrared Gas Sensor - MPY20-CO2
The gas sensor based on the infrared absorption principle has the following strengths: good stability.
NDIR Gas Sensor - MTP40-F
It supports two calibration methods: self-calibration and manual calibration, and the data accuracy error is extremely small.
NDIR CO2 gas Dual Channel Sensor Module - MTP50-A
NDIR gas sensor uses the principle of NDIR to detect the gas in the air.
Infrared particulate matter sensor - MPM20-AH
MPM20 series dust sensor is a self-priming infrared dust sensor.
Air Laser Particulate Matter Sensor - MPM12-BG
MPM12 series laser dust sensor adopts laser scattering principle.
Air Laser Particulate Matter Sensor - MPM13-AS
MPM13 series laser dust sensor adopts laser scattering principle.
Air Laser Particulate Matter Sensor - MPM14-CS
MPM14 series laser dust sensor adopts laser scattering principle.
